Datasheet pdf


An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters. Matched propagation delay for both channels. Outputs in phase with inputs. HIGH AND LOW SIDE DRIVER.

Standard Voltage VD: 2. Low Power Consumption : 0. Detect Voltage Range. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL. The device incorporates a short-circuit protection.

This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. However, no responsibility is assumed by Analog Devices for its use, nor for . Information furnished by Analog Devices is believed to be accurate and reliable. Single chip USB to asynchronous serial data transfer interface. Additional Infomarion.

The data sheet specification for load regulation is measured at the bottom of the package. Negative side sensing is a true Kelvin connection, with the bottom of . Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no . When a surge voltage exceeding maximum rating is applied to the input terminal or when a voltage in excess of the input terminal voltage is applied to the. Pin, Enhanced Flash-Based 8-Bit. CMOS Microcontrollers with.

The revised points can be easily searched by copying an R in the PDF file and specifying it in the Find what: field. A continuous current output capability per channel;. Wide supply voltage range: 2. Lower saturation voltage;.

High-accuracy voltage detection for each cell. Overcharge detection voltage n (n = to 4). Bridge N- Channel FET driver IC, available in lead plastic. M68HC11E Family Data Sheet , Rev.

Freescale Semiconductor. Data sheet maximum output current table (Table 1) represents the maximum practical continuous output current for both mostly discontinuous conduction mode . The data contained in this product data sheet is exclusively intended for technically trained staff. The user will have to evaluate the suitability of the product for . Product Specification: The datasheet contains final data.

The information in this datasheet is believed to be reliable.